D-Link MYDLINK DNR-322L User Manual

34D-Link DNR-322L User Manual
Section 3 - Conguration
Camera Search
Step 1: Click the Search button to search for UPnP cameras. The system
will list all the available cameras at this moment. Click the “+”icontoadd
this camera into your camera list. If the cameras are already added, it will
mark as red word.
Step 2: After clicking the icon, the camera setting page will pop-up. Click
on the camera that you want to add.
Step 3: Enter the camera name, user name, and password of the camera.
Note
• Somecameraswilllimittheloginauthoritytotheadministratoronly.
• ToaddcameraswithouttheUPnPfunction,pleasegotothecameraSetupmenu
and enter the IP address manually.
• Youmaynotbeabletoseeallthecamerasonyourrstsearch.Itmaytakeamoment
for the devices to respond to the UPnP request. Please click Search again if cameras
are not immediately displayed.
Step 4: Click the Add button to add the selected camera.
Step 5: After clicking Add, the updated information will be displayed in
the camera List.
Step 6: Repeat step 2 through 5 to add other cameras into your list.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)