Need help?Do you have a question about the D-Link WBR-1310 and is the answer not in the manual?
General| Wireless Standard | 802.11b/g |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 54 Mbps |
| Security | WEP, WPA, WPA2 |
| Antenna Gain | 2 dBi |
| Ethernet Ports | 4 x 10/100 Mbps |
| Antenna Type | External |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g |
Preparation steps and important considerations before starting the router installation.
Guidelines for optimizing wireless signal range and performance.
Step-by-step instructions for connecting the router to a Cable, DSL, or Satellite modem.
Procedure for integrating the D-Link router with an existing network.
How to log in to the router's web-based management interface using a browser.
Step-by-step guide to quickly configure the router using the automated setup wizard.
Configuring the router to connect to the internet via Dynamic, PPPoE, PPTP, L2TP, or Static IP.
Settings for enabling and customizing your wireless network, including SSID and channel.
Explanation of Wired Equivalent Privacy (WEP) and its encryption methods.
Step-by-step instructions to set up WEP security for your wireless network.
Explanation of Wi-Fi Protected Access (WPA) and its improvements over WEP.
Steps to set up WPA-Personal security using a Pre-Shared Key (PSK).
Instructions for setting up WPA security using a RADIUS server for authentication.
Solutions for problems accessing the router's web-based configuration utility.
Procedure to reset the router's password and restore factory defaults.
Troubleshooting steps for connection issues, including MTU size adjustments.
Details on supported IEEE standards, wireless signal rates, and security protocols.
Information on firewall features, operating temperature, dimensions, and safety compliance.
To Next Page