To Next PageTo Next Page
Need help?Do you have a question about the DAB SMART PRESS and is the answer not in the manual?
General| Operating range | 0-12 bar |
|---|---|
| Operating pressure | 16 bar |
| Liquid temperature range | 0 - 50 °C |
| Supply voltage | 230 V |
| Frequency | 50/60 Hz |
| Degree of protection | IP 55 |
| Type | Electronic pressure switch |
| Pressure Range | 0 - 12 bar |
| Output Signal | Digital |
| Power Supply | 230 V |
| Material | Technopolymer |
| Operating Temperature | 0 - 50 °C |
Details automatic pump control, water loss blocking, flow sensing, and operational status indicators.
Technical specifications including working pressure, calibration, temperature, power, current, protection, and connections.
Guidance on mounting location, connecting to the water supply, and recommended piping practices.
Instructions for adjusting the start pressure and ensuring proper pump priming for correct operation.
Specifies how to make the electrical connection, emphasizing safety regulations and using trained personnel.
Steps to resolve pump jamming issues, including resetting and checking for priming failures.
Diagnosis and resolution for the pump cycling on and off continuously, usually due to system leaks.
Troubleshooting steps for when the equipment is completely off, checking power supply and sensor placement.
