DAB ACTIVE DRIVER M/T 1.0 User Manual

276 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ISTRUZIONI PER L'INSTALLAZIONE E LA MANUTENZIONE

INSTRUCTIONS POUR L’INSTALLATION ET LA MAINTENANCE

INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE

INSTALLATIONS-UND WARTUNGSANLEITUNGEN

INSTRUCTIES VOOR INSTALLATIE EN ONDERHOUD

INSTRUCCIONES PARA LA INSTALACIÓN Y MANTENIMIENTO

INSTALLATIONS-OCH UNDERHÅLLSANVISNINGAR

OΔΗΓΙΕΣ ΓΙΑ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ KAI TH ΣYNTHPHΣH

KURMA VE BAKIM İÇİN BİLGİLER

NÁVOD NA INŠTALÁCIU A ÚDRŽBU

PУКOBOДCTBO ПO MOHTAЖУ И TEXHИЧECКOMУ OБCЛУЖИBAHИЮ

INSTRUCŢIUNI PENTRU INSTALARE ŞI ÎNTREŢINERE

ﺔﻳﺎﻋﺮﻟاو ﺐﻴآﺮﺘﻟﺎﺑ ﺔّﺻﺎﺧ تادﺎﺷرإ

ACTIVE DRIVER M/T 1.0

ACTIVE DRIVER M/T 2.2

ACTIVE DRIVER T/T 3.0

ACTIVE DRIVER T/T 5.5

Table of Contents

Questions and Answers:

D
duncanrachelAug 2, 2025
What to do if DAB Controller displays 'oF' error?
- S
  Sean RobinsonAug 2, 2025
  If the DAB Controller displays 'oF', it could be due to excessive power absorption or a blocked pump. First, check the type of connection (star or delta), verify the direction of rotation using parameter 'rt', and ensure the motor's current draw doesn't exceed the A.D.'s maximum supply. Also, inspect the impeller and motor for any obstructions or foreign objects, and check the motor connection phases.
S
Scott BartonAug 6, 2025
What to do if DAB ACTIVE DRIVER M/T 1.0 Controller shows 'oC' error?
- C
  Christopher WolfeAug 6, 2025
  If the DAB Controller displays 'oC', it may be due to an incorrectly set pump current (rC) or a blocked pump. To resolve this, set 'rC' according to the motor's connection type (star or delta) as indicated on the motor dataplate, and verify the direction of rotation using parameter 'rt'. Also, check the impeller and motor for any obstructions or foreign objects, and inspect the motor connection phases.
G
gbyrdAug 10, 2025
What to do if DAB Controller displays 'bL' error?
- J
  Jennifer FreemanAug 10, 2025
  If the DAB Controller shows 'bL', the possible causes are lack of water, the pump not being primed, or an inverted direction of rotation. You should prime the pump, ensuring there are no air bubbles in the pipelines, and check for obstructions in the suction and filters. Also, inspect the pipeline from the pump to the A.D. for damage or leaks. Finally, check the direction of rotation using parameter 'rt'.
V
Victor HudsonAug 15, 2025
What to do if DAB ACTIVE DRIVER M/T 1.0 displays 'E1' or 'LP' error?
- E
  elizabeth53Aug 15, 2025
  If the DAB Controller displays 'E1' or 'LP', it indicates a low power supply voltage or excessive voltage drop on the line. To solve this, ensure that the line voltage is correct and verify that the power cables have the correct section.
D
David TerrellAug 19, 2025
What does it mean when DAB ACTIVE DRIVER M/T 1.0 shows 'Sb' or 'Go' with flashing lights?
- P
  Phillip PerezAug 19, 2025
  If the DAB Controller displays 'Sb' or 'Go' with flashing lights, it indicates a communication problem. To fix this, check that parameter 'Ad' is set correctly. Ensure the interconnection cable is connected and intact, and verify the correct positioning of the connections on the connector pins.
M
Melinda EscobarAug 23, 2025
What to do if DAB Controller displays 'SC' error?
- B
  Beverly Johnson MDAug 23, 2025
  If the DAB Controller displays 'SC', it means there is a short circuit between phases. To resolve this, ensure that the motor is in working condition and check all relative connections.
S
Sherri BanksAug 27, 2025
What to do if DAB ACTIVE DRIVER M/T 1.0 displays 'bP' error?
- A
  Andrea BrockAug 27, 2025
  If the DAB Controller displays 'bP', it indicates that the pressure sensor is disconnected. To resolve this, check the pressure sensor cable connection.

DAB ACTIVE DRIVER M/T 1.0 Specifications

General

Category	Controller
Protection class	IP55
Frequency	50/60 Hz
Pumped liquid	Clean water
Installation	Horizontal or vertical
Special versions on request	Different supply voltages and frequencies

Summary

Product Manual Title and Compliance

Product Title and Identification

Identifies the product models and the main instruction manual title in multiple languages.

Declaration of Conformity

Official statements confirming compliance with relevant EU directives across several languages.

Installation and Technical Specifications

Key and General Notes

Provides fundamental information, safety warnings, and general notes for the device.

Applications

Details the intended uses and models for the ACTIVE DRIVER.

Technical Data and Limitations of Use

Lists specifications, operating limits, and technical parameters for the device.

Electrical Connections to the Electric Pump

Explains how to connect the device electrically to the electric pump.

Hydraulic Connections

Details the necessary hydraulic connections for the pump system.

Device Operation and Configuration

General Characteristics

Describes the core features and system architecture of the ACTIVE DRIVER.

Keyboard Operation

Describes the functions of the device's control buttons for navigation and input.

Initial Start-Up Operations

Guides users through the first steps of setting up and powering on the device.

Installer Parameter Menu

Covers advanced settings accessible by installers for optimal device configuration.

Technical Assistance Menu

Explains parameters for technical adjustments and fine-tuning of the device.

Display, Maintenance, and Troubleshooting

Display Items

Lists and explains the information displayed on the device screen.

Manual Operation Mode

Describes how to enter and use the manual operation mode of the device.

Restoring Factory Settings

Provides instructions on how to reset the device to its original factory configuration.

Error and Status Conditions

Details error codes, status indicators, and potential issues the device may encounter.

Troubleshooting

Offers solutions and remedies for common problems and error messages.

Related product manuals

Preview: DAB ACTIVE DRIVER M/M 1.1

DAB ACTIVE DRIVER M/M 1.1

DAB ACTIVE DRIVER T/T 3.0

Preview: DAB ACTIVE DRIVER PLUS M/T 1.0

DAB ACTIVE DRIVER PLUS M/T 1.0

Preview: DAB SMART PRESS WG 1,5HP

DAB SMART PRESS WG 1,5HP

Preview: DAB ES 1 M

DAB ACTIVE DRIVER PLUS M/T 2.2

DAB ACTIVE DRIVER PLUS M/M 1.1

ACTIVE DRIVER PLUS M/M 1.8 / DV

DAB ACTIVE DRIVER PLUS T/T 3