Dacor DCM24 Use And Care Manual

E9
Parts of the Microwave
SPECIAL NOTE FOR THE TURNTABLE AND TURNTABLE SUPPORT
To avoid arcing, carefully read before placing the turntable support and turntable into the oven.
1. Place the turntable support, with the engraved word “Top” facing up, securely within the three pins on the
turntable motor shaft. See Figure 3 to check for the correct placement.
FIGURE 1 FIGURE 2 FIGURE 3
Turntable support
Turntable motor shaft
Turntable support
The pins of the turntable motor shaft
2. Place the turntable on the turntable support. The turntable should be placed so that all three rollers of the
turntable support come in contact with the at, underside surface of the turntable. Refer to the chart below to
ensure correct placement.
CORRECT INCORRECT
Underside View
Flat surface of the turntable
Rollers of the turntable support
Flat surface of the turntable
Not on at surface
Side View
Flat surface of the turntable
Rollers of the turntable support
Flat surface of the turntable
Rollers of the turntable support

Dacor DCM24 Specifications

General

Brand	Dacor
Model	DCM24
Category	Microwave Oven
Language	English