15
Operating the Oven
12 Hour Timer Feature
Your range is equipped with a feature that automatically turns
the oven off after 12 hours of continuous use. The 12 hour timer
resets if you change the cooking temperature or cooking mode.
This feature does not apply to the cooktop.
The range ships from the factory with the 12 hour timer enabled.
To disable or enable the 12 hour timer feature:
With the oven off, push and hold the • TIMER 1 key for
about ten seconds, until the control panel beeps. “ON” will
appear on the display if the 12 hour timer is enabled.
Push the • SELF CLEAN key
to disable (or enable) the 12
hour timer.
Push • START
to save the changes and return to the clock
display.
Preset (Jump-in) Temperature Settings
Your oven has a preset “jump-in” temperature setting for each of
the cooking modes to reduce the need to always enter the tem-
perature. See the table below. See Starting Your Oven on page
14 for directions on how to cook at the preset temperature.
Cooking Mode Preset Temperature
Bake 350°F
Convection bake 325°F
Pure Convection 325°F
Convection roast 375°F
Broil 555°F
Convection broil 555°F
Lock-Out Feature
If you want to disable the keys on the control panel
when the oven is not in use:
Push and hold the • CANCEL-SECURE key for about four
seconds. The control panel keys will stop working and “OFF”
will appear on the display. Only the CANCEL-SECURE and
the oven light keys remain functional.
To reactivate the control panel, press and hold the • CANCEL-
SECURE key for four seconds. On model ER48D, press either
CANCEL-SECURE key to disable the control panel.
To Next Page
Loading...
Need help?
General