Daedong 3A165D User Manual

ENGINE
• When disassembling, arrange each part on a clean place. Do not mix them up. Replace bolts and
nuts where they were.
• When servicing voltaged places or connecting instruments to electrical equipment, first
disconnect battery negative terminal.
• Replace gaskets or O-rings with new ones when reassembling, and apply grease on a O-ring
and the oil seal when reassembling.
• When exchanging parts, use DAEDONG genuine parts to maintain engine performance and
safety.
• To prevent oil and water leakage, apply non-drying adhesive to the gaskets according to this
manual before reassembling.
• When hoisting up the engine, use the hook provided on the cylinder head.
• When installing up the engine, use the hook provided on the cylinder head.
• When installing external cir-clips or internal cir-clips, direct corner end to the non-loosening
direction.
1.5. GENERAL WA R N I N G

Daedong 3A165D Specifications

General

Brand	Daedong
Model	3A165D
Category	Engine
Language	English