H11O605A
H11O606A
(1) Oil Dipstick
(A) Upper Limit (B) Lower Limit
1. Park the machine on a flat sur-
face, lower the implement and
shut off engine.
2. Depress the brake pedals and ap-
ply the parking brake.
3. Set all shift levers into the neutral
position.
4. Stop the engine.
-
-
(1) Gauge (2) Oil Filler Plug
(A) Oil Level Is Acceptable Within Range
5. Pull out the oil dipstick, clean it,
and then insert it into its original
position. Then, pull it out again
and check if the fuel level is within
the specied range.
6. If the oil level is too low, add some
new oil so that the level is within
the allowable range. (Refer to “Lu-
brication” in the chapter “Service”)