4. In order to set the belt tight, move
the upper part of the alternator
backward.
5. Apply moderate thumb pressure to
the belt between pulleys.
(1) Battery
Mishandling the battery shortens the
service life and adds to maintenance
costs. If the battery is insufficiently
charged, the headlights may dim and
the engine is hard to start. It is impor-
tant to inspect the battery periodically.
1. The battery cable should always be
clean and rmly connected. When
installing a new or used battery,
clean its terminals and the end of
the cable.
2. Check the electroly level and add
distilled water if necessary.
-
-
-
-
6. If tension is incorrect, loosen the
alternator mounting bolts and, us-
ing a lever placed between the al-
ternator and the engine block, pull
the alternator out until the deec-
tion of the belts falls within accept-
able limits.
7. Replace the fan belt if it is dam-
aged or cracked.
-
3. Check the battery and cable for
damage and corrosion.
4. Apply grease to the terminals and
cable end in order to prevent corr-
osion.
Proper fan
belt tension
(A)
A deection between 7
~ 9 mm (0.28 ~ 0.35 in.)
when the belt is pressed
in the middle of the span.
CAUTION
H11O633A
WARNING
To Next Page