11. Add grease to all the lubrication
llerportsofthetractor.
12. Replace any worn or damaged
component.
13. If a loader or implement is in
-
stalled, lower it onto level ground.
14. Apply grease to the exposed cyl
-
inder rod.
15. Wash the cooling system and
drain water from it. Also, add anti-
freeze as well as coolant.
16.Replacealltheoilandlters.
17.Replacetheaircleanerlter.
18. Chock the frame in order to re-
move the weight from the tires.
19. Set all control systems neutral.
20. Plug any open exhaust pipes.
21. Attach a tag onto the tractor to in-
form the storage condition of the
tractor.
(1) Latch (2) Clutch Pedal
(A) Depress (B) Fix
H11O702A
22. Interlock the brake pedals and
apply the parking brake. Depress
the clutch pedal fully and move
the latch. When the clutch pedal
is released, the latch hook is en-
gaged with the clutch.
To avoid injury:
Never clean the tractor body
while the engine is running.
Never run the engine in an en-
closed area without proper
ventilation system in order to
prevent poisoning by exhaust
gas.
When storing the tractor, re-
move the key from the switch
and store it separately in or-
der to prevent an unauthor-
ized person from operating the
tractor and being injured.
CAUTION
When washing the tractor, be
sure to stop the engine. Allow
sufficient time for the engine
to cool before washing.
Cover the tractor after the
muffler and the engine have
cooled down.
IMPORTANT