[WINKER BULB]
<FRONT WINKER BULB>
① Loosen the 6 upper cover setting
screws, and remove the front cover
assembly.
② Turn the winker bulb sockets
counterclockwise, and remove it.
③ Install a new bulbs in the reverse order
of removal.
<REAR WINKER BULB>
① Press the winker lens groove and open
the winker lens using plain screwdriver.
② Slightly press down on the bulb and
turn it counterclockwise.
③ Install a new bulb in the reverse order
of removal.
44
WINKER
BULB
SOCKET
SCREWS
SCREWS
SCREWS
FRONT COVER
FRONT COVER
BULB
WINKER LENS
**SJ-50 OWNERS 02.11.5 5:30 PM 페이지44
To Next Page
Loading...
