DAEWOO ELECTRONICS DWF-5550 - Page 10

2019
You can select four kinds of water levels.
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
—
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
• Automatically : —
• Manually :
E. LOW ➜ LOW ➜ MEDIUM ➜ HIGH
Push this button to start the program.
3 WATER LEVEL SELECTION
(IF NECESSARY)
4 START
EACH
COURSE
Keep, pushing untile the lamp reaches a
wanted course.
ONLY WASH
(15 min. ➜ 40 min. ➜ 0 ➜ 3 min. ➜ 6 min)
ONLY RINSE
(2 times ➜ 3 times ➜ 0 ➜ 1 times)
ONLY SPIN
(5 min. ➜ 7 min. ➜ 0 ➜ 1 min. ➜ 3 min)
WASH ➜ RINSE ➜ SPIN
WASH ➜ RINSE
WASH ➜ SPIN
RINSE ➜ SPIN
You can dicide which water should be
input (or supplied) at wash and rinse
process.
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
• Automatically : COLD
• Manually :
COLD ➜ WARM ➜ HOT
1 COURSE SELECTION
2 WATER TEMPERATURE SELECTION
(IF NECESSARY)