21
2. Door Handles
1. Insert rectangular bent tool whose diameter is less than
4mm into the hole of Handle to remove the Handle
Decorator.
2. Pull out Handle Decorator from up to down.
Be careful not to damage the surface of Handle. and door
Once it is peeled or damaged, corrosion may occur from
metal parts beneath the handle.
3. Remove the 2 Handle screws.
4. See to it that the screws are fastened well when
reassembling the handle.
3. F Light bulb
1. Remove cover by pushing the hook.
DISASSEMBLY AND ASSEMBLY
To Next Page
Loading...
