13
5. To remove control panel parts.
1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly.
2) Remove screws which secure the PCB assembly to control panel.
3) Disconnect wire flat from the connector of the PCB assembly.
4) Remove the PCB from the control panel.
5) Remove the function buttons knob, window display and decorator ring from the control panel.
6) Reverse the above steps for reassembly.
13
REF NO. PART CODE PART NAME DESCRIPTION Q'TY REMARK
B01 3513408010 KNOB VOLUME ABS SG-175 SG-0760D COATING 1
B02 3511613210 DECORATOR RING ABS SG-175 SG-0760D COATING 1
B03 3515502200 WINDOW DISPLAY SAN CR-5381 SMOG 1
B04 3516731310 CONTROL-PANEL HIPS SG-970 HG-1760H 1
B05 3516912510 BUTTON FUNCTION-A ABS SG-175 SG-0760D COATING 1
B06 PKBPMSAZ00 PCB BUTTON MANUAL AS KOR-6C6R5S 1
B07 PKMPMSAZ30 PCB MAIN MANUAL AS KOG-3C6R 1
B08 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN 4
B09 7621301011 SCREW TAPPING T2 PAN 3X10 PW MFZN 3
B10 3516912610 BUTTON FUNCTION-B ABS SG-175 SG-0760D COATING 1
C/PANEL ASSEMBLY : PKCPSWAZ30
To Next Page
Loading...
