Need help?Do you have a question about the Daewoo 14Q1 and is the answer not in the manual?
Details hazards and protection measures against X-ray radiation during servicing.
Outlines essential safety guidelines for handling high-voltage equipment.
Emphasizes critical safety features of specific electronic components.
Procedures for tuning AFT, AGC, screen, white balance, and focus.
Controls for vertical and horizontal picture shape and size.
Details the functions of the remote control used for service operations.
Description of the 8-bit micro-controller and its features.
Description of the single chip TV processor for IF and video processing.
Details the monolithic video amplifier for CRT cathode drive.
Description of the DC-coupled vertical deflection output circuit.
Description of the hybrid IC for switching power supplies.
Overview of the micro-controller for remote control units.
Explains IF signal amplification, AFC, and video demodulation stages.
Covers tuner gain control, sound demodulation, and input source switching.
Details horizontal/vertical sync, colour decoder, and video filters.
Describes RGB output, beam control, and AFC tuning functions.
Explains SECAM decoding, delay line, and vertical/horizontal deflection systems.
Covers video amplifiers and the STR-S5707 power supply operation.
Details over-current, over-voltage, and thermal shutdown protection.
Step-by-step guide to diagnose and fix the absence of a raster.
Troubleshooting steps for when a raster is visible but no picture.
Steps to resolve issues showing only a single horizontal line.
Diagnostic steps for color reproduction problems.
Troubleshooting procedures for audio output issues.
Diagnosing problems with external inputs and on-screen display.
Steps to identify and fix remote control malfunctions.
Chart showing DC voltage points for IC 1701.
Chart showing DC voltage points for IC 1501.
Voltage charts for ICs 1301, 1502, 1503, and 1802.
Overall schematic diagram for the TV chassis.
Schematics for the CRT section and remote control unit.
Illustrates key signal timing diagrams for troubleshooting.
To Next Page
General
