Cyclone Freedom 22.2V Cordless Vacuum
Cleaner
FLR00010
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
6. Replace the Conical Hepa Filter (2)
inside the Cyclonic Filter, rotate the
filter anticlockwise towards the
‘LOCK’ position as shown circled left.
7. Replace Conical Hepa & Cyclonic Filters
(2) into the vacuum rotating clockwise
as shown right.
8. Press the Air Outlet Filter Door
Release Button (10) to open the Air
Outlet Filter Door (11). Remove the
air outlet filter and wash in warm
running water until clean. Allow the
filter to dry thoroughly for 24 hours
before reuse.
Replace the filter and push the Air
Outlet Filter Door (11) closed.
Replacing the Filters in Your Cordless Vacuum Cleaner
Cleaning and Replacing the Outlet Filter
Care and Use of your Cordless Vacuum Cleaner
• Always disconnect the cleaner from the mains charger before cleaning.
• Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or
abrasive cleaners.
• Do not submerge the cleaner or its charger in water or any other liquids.
• Empty the Dust Compartment (4) as soon as it has reached maximum capacity
(see above).*
• Wash the Conical Hepa, Cyclonic Filters (2) and the Air Outlet Filter (11)
regularly – see table below.
To Next Page
Loading...
