EasyManuals Logo

Daewoo D40SC-2 Service Manual

Daewoo D40SC-2
592 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #520 background imageLoading...
Page #520 background image
Operation Section
- 57 -
Observe all indicator lights and gauges frequently
during operation, to make sure all systems are
working properly. All of the indicator lights will come
ON with the ignition switch in the ON position
before the engine is started.
1. The engine oil pressure indicator light (1), will not
come ON with the engine running, unless there is
low or no oil pressure. Stop the engine immediate-
ly, if the light comes ON.
2. The alternator indicator light (2), should not come
ON during normal operation. The alternator is not
charging if the light comes ON with the engine run-
ning.
3. Observe the diesel or gasoline fuel level gauge
(4) for fuel level in the tank.
4. The engine coolant gauge pointer (5), will be in
the green band with the engine running, unless the
coolant temperature is excessive.
5. The power shift transmission oil gauge pointer
(6), will be in the green band with the engine run-
ning, unless the oil temperature is excessive.
6. Observe the hour meter to make sure it is oper-
ating properly.
After Starting the Engine
12
3
456
IA3M3001
IA3M3001
IA3M3031

Table of Contents

Other manuals for Daewoo D40SC-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daewoo D40SC-2 and is the answer not in the manual?

Daewoo D40SC-2 Specifications

General IconGeneral
ModelD40SC-2
CategoryForklifts
Power TypeDiesel
Rated Capacity4000 kg
Load Capacity4000 kg
Engine Power55 kW
TransmissionAutomatic
Tire TypePneumatic
Lift Height3000 mm

Related product manuals