D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
86
Printed in Jan. 2001 PS-MMA0415-E1A
Torque
2.2 kg.m
z Apply engine oil to the oil filter cartridge
o-ring and assemble the cartridge using a
filter wrench.
3.3.24. Oil cooler
z Install the gasket on the cylinder block.
z Assemble the oil cooler by tightening the
assembling bolts.
z Connect the cooling water pipe with the
cooling water pump and tighten a hose
clamp.
3.3.25. Starter
z Assemble the starter in position on the
flywheel housing.
Torque
8.0 kg.m
3.3.26. Intake and exhaust valves
z Identify the marks of "IN" and "EX"
impressed on the valve head before
assembling the valve with the valve head.
z With a valve stem seal fitting jig,
assemble the valve stem seal on the
G1101
To Next Page
Loading...
