SETUP
27
Initial Setup
• Some options cannot be reset, including Parental Controls and Password.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock setting again.
If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1
Press [SETUP].
2
Use [œ/√] to select ‘Restore Defaults ‘.
3
The Initialize menu will appear. Use the […†œ √] buttons to select
‘RESET‘ and press [ENTER].
System Information
System Information helps service personnel identify key firmware
information about your DVD Recorder+VCR in case service is required.
Restore Defaults
System Info
Choose OK Exit
ENTER SETUP
œ √
…
†
Restore Defaults
Choose OK Exit
ENTER SETUP
œ √
…
†
Version WP3000000FQ-050813
Loader Version AA003 A100
Micom Software 1.0.6
• Default Reset
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 27 mac001 1200DPI 90LPI
To Next Page
Loading...
