33
OK
EXIT
OK
EXIT
Multi CI-CA List
Top Up TV
Select Access Return Exit
Parental control
Parental control Disabled
Channel lock No
Maturity level None
Select Access Return Exit
PIN code change
DVB Menu
CONDITIONAL ACCESS
- This allows you to upgrade your TV set with additional features in-
cluding access to extra channels (if available) using a conditional ac-
cess module (eg. TopUp TV).
- If there is no CI Card in the slot, “No CI or CA device present” appears
on the screen.
- The Common Interface menu allows you to access a pay-per-view(PPV)
service on your TV set. This feature operates once you have obtained a
CI module and a viewing card. If you want to know the PPV service in
your region, please contact your nearest PPV provider for detail.
- Sub menu shown to the right is depends on module and may dif-
ferent than yours.
Note :
A Common Interface is available to connect a CAM (condition-
al access module) and a smartcard. Please contact your service provid-
er to get more information about these modules.
Parental Control
You can prevent unauthorized users such, as children, from watching
unsuitable programmes by a digit PIN code that is defined by the user
(PIN: Personal Identification Number).
PARENTAL CONTROL
You can select between Enabled and Disabled by using
“/”
buttons.
If you select enabled then the following items can be altered.
Channel lock
If you toggle this option to Yes, the channels you locked in the edit chan-
nel list menu can’t be displayed before you enter the PIN Code.
Maturity level
There are 18 levels total. If you toggle this option to a number (1-18), for
example, you toggle it to 12, that’s to say, if the channels broadcast ma-
terial is not suitable for the family members who are under 12 years old,
you must enter the PIN Code before you can view them. (The maturity
level information should be broadcast with these programs.)
PIN Code change
Press the “
RED
” button and enter the previous code by using the 0-9 buttons on the remote control.
Then enter the new code twice times to confirm. Press the “
OK
” button to quit the parental control menu with sav-
ing these alteration. If you don’t want to change new PIN Code press the “
CANCEL/EXIT
” button to quit the paren-
tal control menu.
Note :
• The default PIN Code for parental setting is “0000”.
• If you have forgotten your personal password, you can reset to the default password “0000” by pressing the key se-
quence:
RED - RED - GREEN - GREEN - YELLOW - YELLOW - BLUE - BLUE
To Next Page
Loading...
Need help?
General
