2
1. PARTS LOCATION
2. WARNING LABELS ON THE MACHINE
(1) Read owners manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all chlldren, bystanders and helpers 15 meters away from the machlne.
lf warning label peels off or becomes soiled and impossible to read, you should contact the
dealer from which you purchased the product to arder new labels and affix them in the
required location(s).
Never modify your machine.
We won warrant the machine, if you use the remodeled brushcutter or if you don observe the
proper usage written in the manual.
3. SYMBOLS ON THE MACHINE
For sale operation and maintenance, symbols are carved in relief on the machine. According to
these indications, please be careful not to make a mistake.
The port to refuel the IX GASOLINE Position: FUEL TANK CAP
The direction to clase the choke Position: AIR CLEANER COVER
The direction to open the choke Position: AIR CLEANER COVER
lf you turn the rod by screwdriver follow the arrow to the AX position, the chain oil flow
more, and if you turn to the IN position, less.
Position: Bottom of the TRANSMISSION
4. FOR SAFE OPERATION
Air filter
Muffler
Throttle cable
Throttle trigger
Shaft tube
Trimmer blade
Quick joint
Transmission
Transmission
Chain cover
Guard
Nylon head
3T blade
Bar and chain
Suspension
Point
Throttle set button
Loop handle
To Next Page
Loading...
