3
1. PARTS LOCATION
2. WARNING LABELS ON THE MACHINE
(1) Read owners manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all chlldren, bystanders and helpers 15 meters away from the machlne.
lf warning label peels off or becomes soiled and impossible to read, you should contact the
dealer from which you purchased the product to arder new labels and affix them in the
required location(s).
Never modify your machine.
We won warrant the machine, if you use the remodeled brushcutter or if you don observe the
proper usage written in the manual.
3. SYMBOLS ON THE MACHINE
For sale operation and maintenance, symbols are carved in relief on the machine. According to
these indications, please be careful not to make a mistake.
The port to refuel the IX GASOLINE Position: FUEL TANK CAP
The direction to clase the choke Position: AIR CLEANER COVER
The direction to open the choke Position: AIR CLEANER COVER
lf you turn the rod by screwdriver follow the arrow to the AX position, the chain oil flow
more, and if you turn to the IN position, less.
Position: Bottom of the TRANSMISSION
4. FOR SAFE OPERATION
1. Read this manual carefully until you completely understand and follow all
safety and operating instructions.
2. Keep this manual handy so that you may refer to it later whenever any
questions arise. Also note, if you have any questions which cannot be
answered herein, contact the dealer from whom you purchased the product.
3. Always be sure to include this manual when selling, lending, or otherwise
transferring the ownership of this product.
4. Never allow children or anyone unable to fully understand the directions
given in the manual to use the machine.
WORKING CONDITION
should wear proper clothing and protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face protector
(4) Thick work gloves
(5) Non-slip-sole work boots
To Next Page
Loading...
