- 28 -
USB and SD/MS/MMC Card Function
Preparation
In DVD mode, connect USB memory to the USB port or insert SD/MS/MMC card into the
SD/MS/MMC card slot on the right side of the unit.
¾ Make sure that files are stored on USB memory or the SD/MS/MMC card before connection.
File Playback
1. Press the CARD button to select disc playback, USB playback or SD/MS/MMC playback. The
default state is disc playback. Please see the figure below:
2. Press the button to select folder and press ENTER button to enter.
3. Press the button to select file and press PLAY button to play.
4. During playback, press the STOP button to stop playback; press the button to return to
the folder menu.
Note
¾ Screen display varies from disc to disc.
¾ After disconnection USB memory or SD/MS/MMC card from the unit, the unit will return to the
disc playback mode.
00:00 00:00
001/002
BAK
JPEG
To Next Page
Loading...
