6
EDIT
1.Press the menu button to select INSTALL.
2.Press the PR y
/
x buttons and then select INSTALL.
3. Press the OK button.
4.Select EDIT with the PR y
/
x buttons and press the OK buttons to
start EDIT.
5.DELETE PROGRAM POSITION DATA.
Position the blue-line to the program to delete with the PR y
/
x
buttons and the DELETE(YELLOW) button.
6.CHANGING THE ORDER OF THE CHANNELS
Position the blue-line to a program to move with the PR y
/
x buttons
and the MOVE(GREEN) button.
Press the PR y
/
x buttons to position the blue-line to another
program to move.
By pressing the MOVE(GREEN) button again, selected two
program will be moved.
7.SKIPPING THE CHANNELS
You can select SKIP with the SKIP(RED) button in EDIT mode then press the PR y
/
x buttons
to skip the desired program.
A program marked with skip “ ” is skipped when changing program using the program
UP
/
DOWN(on normal operation).
Press the PR y
/
x buttons to select program number you want. The screen will change
according to the selected program number.
SOUND SYSTEM
1.Press the MENU button to select INSTALL.
2.Press the PR y
/
x buttons and then select INSTALL.
3. Press the OK button.
4. When the sound is abnormal, select SYSTEM with the
PR y
/
x buttons.
Select the correct sound system with the C
/
B buttons.
To Next Page
Loading...
Need help?
General
