10
You can change the name that appears on the screen (max. 9 characters)
during idle stage:
1. Press key. Use or keys to scroll to ‘HANDSET’
and press key.
2. Use or keys to scroll to ‘HANDSET NAME’ and press
key.
3. The current handset name is shown. Delete the character by
key. Use the keypad to enter the new name.
4. Press key to confirm.
5.4 Turning key beep ON/OFF
You can set the handset to make a beep whenever you press a key.
1. Press key. Use or keys to scroll to ‘HANDSET’
and press key.
2. Use or keys to scroll to ‘KEYPAD BEEP’ and press
key.
3. Use or keys to scroll to ‘ON’ and press key.
5.5 Select base
If you set the handset to ‘manual selection’, the handset will only choose
the base unit you have set.
1. Press key. Use or keys to scroll to ‘HANDSET’
and press key.
2. Use or keys to scroll to ‘SELECT BASE’ and press
key.
To Next Page
Loading...
