Daewoo DTD-1200 - Call Transfer and Intercom between 2 Handsets; Call transfer and conference call during an external call; Internal call (intercom); Reset of the Handset

17
NOTE: You can only remove existing handsets and others than the one
you are using. These functions only work when more than one handset
(like a Twin/ Triple/ Quadruple) is registered to the base.
10. Call Transfer and Intercom between 2 Handsets
10.1 Call transfer and conference call during an external call
During an external call, press key followed by the number (1-5) of
the other handset. The other handset will start to ring:
When the other handset takes the line you can talk internally.
§ If you hang up, the external line will be connected with the other
handset.
§ If you press and hold key for 2 seconds you can talk with
the 2
nd
handset and external line at the same time (conference
call). Press the key to end the call.
10.2 Internal call (intercom)
1. In standby press key followed by the number (1-5) of the
other handset.
2. The other handset will start to ring. You can stop the ringing by
pressing the key or key.
3. If the other handset answers the call by pressing the key
you can talk internally.
4. Press key to end the call.
11. Reset of the Handset
This will undo all changes and set back all default settings (ringer volume,
ringer melody, etc...).
1. Press key. Use or keys to scroll to ‘HANDSET’
and press key.
2. Use or keys to scroll to ‘RESET’ and press key.