11
3. Use or keys to select to ‘MANUAL’ or ‘AUTO’.
4. Select ‘MANUAL’ if you want to set it as MANUAL mode.
NOTE: When you have activated Automatic base selection and the
handset is out of range from the current base, the handset will search for
the nearest base only during standby (not during communication).
CAUTION: Before you can select a base unit, the handset must be
registered to the base first.
Key lock
When the keypad is locked, pressing any key will have no effect during
standby (except holding the key).
1. Press and hold key. Appears on the display and the
keypad is locked.
2. Press and hold key again to un-lock the keypad.
3. When there is an incoming call, you can still answer the call by
pressing key.
4. During the call, the keypad functions as normal. When the call is
ended, the keypad will be locked again.
6. Phonebook
You can program 50 phonebook entries in the phone’s memory. Names
can be up to 16 characters long and numbers up to 24 digits.
6.1 Add phonebook entries
1. Press to enter the Phone Book.
2. Press key and ‘NEW ENTRY’ will display.
3. Press key and enter the name by using the keypad.
4. Press key to confirm the name.
5. Enter the telephone number, press key to confirm.
To Next Page
Loading...
