24
13. ALLERGY CARE(D-UD121X ONLY)
Note
• You can't select 'Cold' Water temp.
• Please don't wash the weak laundry for high temp.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
• Put the detergent into the main wash room(I I marking).
• Softener should be below 'MAX' level.
• Put the detergent into the pre wash room(I marking) only if you want to add prewash.
• When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
• The LED shows only '- --' signal.
Select the 'Allergy Care' program using the program selection dial
• If you press 'Start/Pause' button after pressing Power button without selecting
program, the 'Normal' program is selected as default program.
• 'Main wash' and 2 times rinse and 'Medium' Spin speed and '40°C' water temperature
are selected automatically.
• If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed'
select program what you want to change by pressing each button.
Press the 'Start/Pause' button.
• The washer will be operated with locking Door and supplying water after sensing the
amount of laundry automatically.
1
2
3
4
To Next Page
Loading...
