To Next PageTo Next PageWhat does IE error mean on my Daewoo DWD-F1013?
To resolve the IE WATER INLET ERROR on your Daewoo washer, open the water tap if it is closed. If the filter of the valve inlet is clogged, clean it. If these steps do not work, you may need to change the valve inlet, the water level sensor, the drain motor, or the PCB ASS’Y.
What to do if the door on my Daewoo DWD-F1013 Washer won't open?
If your Daewoo washer door won't open, wait two minutes to give the electric locking mechanism time to release for safety reasons.
How to fix a Daewoo Washer that won't drain?
If your Daewoo washer isn't draining water, or is draining slowly, inspect the drain hose for kinks or clogs and clean and straighten it. Also, check the drain filter for clogs and clean it.
What does PFE error mean on my Daewoo DWD-F1013?
To fix the PFE PUMP FILTER ERROR on your Daewoo washer, clean the drain pump filter. If the drain pump does not work during spin, it may need to be replaced. Also, use the proper amount of detergent and place the drain hose 1m below the floor.
What does OE error mean on my Daewoo Washer?
To address the OE DRAIN ERROR on your Daewoo washer, start by cleaning and straightening the drain hose if it's kinked or clogged. If the issue persists, you may need to replace the drain motor, valve inlet, water level sensor, or PCB ASS’Y.
What does H2 error mean on my Daewoo DWD-F1013?
To address the H2 THERMISTOR WASH ERROR on your Daewoo washer, you may need to change the thermistor wash. Also, check the connector of the thermistor wash.
Why is my Daewoo Washer leaking water?
If your Daewoo washer is leaking water, check the inlet and drain hoses for looseness at both the tap and washer connections. Tighten these connections if needed. Also, inspect your house drain pipes for clogs; unclog them yourself, or contact a plumber if necessary.
Why won't my Daewoo Washer spin?
If your Daewoo washer isn't spinning, make sure the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing Start/Pause before the washer begins to spin, as the door must lock first.
What does H4 error mean on my Daewoo DWD-F1013?
To fix the H4 THERMISTOR WASH OVERHEATING ERROR on your Daewoo washer, check the water level. Also, the thermistor wash may need to be replaced.
What to do if my Daewoo DWD-F1013 Washer leaks water?
If your Daewoo Washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer itself. Additionally, inspect your house drain pipes for clogs and unclog them. If the problem persists, it may be necessary to contact a plumber.
General| Model | DWD-F1013 |
|---|---|
| Brand | Daewoo |
| Spin Speed | 1000 RPM |
| Water Level Selection | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Color | White |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| Dimensions (W x D x H) | 60 x 55 x 85 cm |
Information on transit bolts used to prevent internal damage during transport.
Guidelines for selecting an appropriate installation location for the washing machine.
Safety instructions specific to BS plug wiring for U.K. users.
Step-by-step instructions for connecting the water inlet hose to the machine.
Procedures for correctly installing the drain hose for proper water discharge.
How to adjust the machine's legs to ensure stability and reduce vibration.
Guide on cleaning the exterior and interior of the washing machine.
Instructions to prevent washer damage when stored or operated in freezing temperatures.
Steps to clean the water inlet filter to ensure proper water flow.
How to clean the drain pump filter to maintain efficient drainage.
Process for cleaning the detergent case and its recess.
Methods for cleaning the washing drum to remove limescale and rust.
Procedure for disassembling and removing the door lock switch.
Steps for disassembling and removing the heater and thermistor components.
Instructions for disassembling and removing the universal motor.
Steps for disassembling and removing the drain pump assembly.
Detailed parts breakdown for the front panel of DWD-F1X1X washing machine models.
Specific part codes and specifications for PCB assemblies across various models.
Components and parts list for the front cabinet assembly of the washing machine.
Exploded view and parts list for the washing machine's tub assembly.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Button to turn the washing machine ON or OFF.
Button to start, stop, or pause wash cycles.
Adjusts water temperature based on laundry type.
Allows selection of different spin speeds.
Enables selection of additional wash options like Pre-Wash, Rinse+.
Decreases pre-set washing time by 10 minutes.
Reserves the finishing time of washing for a future start.
Prevents accidental operation by children.
Selects wash programs by turning the dial.
Displays progress times for wash cycles, programs, and special options like Islamic Rinse.
Guides on checking PCB and washing machine operations via test modes.
Explains how to check water level frequency and related parameters.
Allows continuous spinning of the washing machine at constant speed.
Enables repetitive operation of the washing machine with a selected course.
Addresses common issues like noise, leaks, and slow filling/draining.
Lists error messages, their causes, and solutions for specific faults.
