E
Edward MckinneySep 23, 2025
How to troubleshoot H8 HEATER WASH OVERHEATING ERROR?
- DDarlene EricksonSep 23, 2025
To resolve the H8 HEATER WASH OVERHEATING ERROR on your Daewoo Washer, check the water level and the heater wash.
To Next PageTo Next PageHow to troubleshoot H8 HEATER WASH OVERHEATING ERROR?
To resolve the H8 HEATER WASH OVERHEATING ERROR on your Daewoo Washer, check the water level and the heater wash.
What to do if the Daewoo Washer door does not open?
If your Daewoo Washer door won't open, wait two minutes to allow the electric locking mechanism to release after the cycle has stopped. The door is designed to remain locked for safety reasons once a cycle has started.
What to do if my Daewoo DWD-F1042 leaks water?
If your Daewoo Washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer itself. Additionally, inspect your house drain pipes for clogs and unclog them. If the problem persists, it may be necessary to contact a plumber.
How to fix Daewoo DWD-F1042 that does not drain?
If your Daewoo Washer is not draining water properly or is draining slowly, begin by checking the drain hose for any kinks or clogs; clean and straighten the hose if needed. Also, inspect the drain filter for any blockages and clean it thoroughly.
How to fix Daewoo DWD-F1042 that will not spin?
If your Daewoo Washer is not spinning, make sure that the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing the button for the washer to begin spinning, as the door must lock first.
What to do if my Daewoo DWD-F1042 Washer shows OE DRAIN ERROR?
To resolve the OE DRAIN ERROR on your Daewoo Washer, clean and straighten the drain hose. If problems persist you should change the drain motor, valve inlet, water level sensor or the PCB ASS’Y.
Why is my Daewoo Washer making a rattling noise?
If your Daewoo Washer is making a rattling or clanking noise, there might be foreign objects like coins or safety pins in the drum or pump. Stop the washer and check the drum for any such items.
Why is water not entering my Daewoo Washer?
If water is not entering your Daewoo Washer or is entering slowly, verify that the water supply is adequate by checking another tap. Ensure the water supply tap is completely open and that the water inlet hose is not kinked. Also, check the filter of the water inlet for any clogs.
Why is my Daewoo Washer oversudsing?
If your Daewoo Washer is producing excessive suds, it may be due to using too much or an unsuitable detergent. Try using a suitable detergent and the correct amount for your load size.
Why is my Daewoo DWD-F1042 making a vibrating noise?
If your Daewoo Washer is making a vibrating noise, ensure all transit bolts and packing have been removed according to the installation guide. If the noise continues, it could be due to an uneven wash load. Stop the washer and rearrange the load to balance it.
Information on transit bolts used to prevent damage during transport.
Instructions for safely removing transit bolts before operation.
Guidelines for selecting an appropriate and stable location for the washing machine.
Important safety information regarding the BS plug and wiring for UK users.
Step-by-step guide for connecting the water inlet hose.
Instructions for correctly installing the drain hose for proper water drainage.
Procedure for ensuring the washing machine is level to prevent noise and vibration.
Guide to cleaning the exterior and interior of the washing machine.
Procedure for cleaning the water inlet filter to ensure proper water flow.
Instructions for cleaning the drain pump filter to ensure smooth operation.
Guide to diagnosing and resolving common symptoms like noise, leaks, and operational failures.
Information on transit bolts used to prevent damage during transport.
Instructions for safely removing transit bolts before operation.
Guidelines for selecting an appropriate and stable location for the washing machine.
Important safety information regarding the BS plug and wiring for UK users.
Step-by-step guide for connecting the water inlet hose.
Instructions for correctly installing the drain hose for proper water drainage.
Procedure for ensuring the washing machine is level to prevent noise and vibration.
Guide to cleaning the exterior and interior of the washing machine.
Procedure for cleaning the water inlet filter to ensure proper water flow.
Instructions for cleaning the drain pump filter to ensure smooth operation.
Guide to diagnosing and resolving common symptoms like noise, leaks, and operational failures.
General| Type | Front Load |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 1400 RPM |
| Energy Rating | A+++ |
| Weight | 70 kg |
| Maximum spin speed | 1400 RPM |
| Washing capacity | 10 kg |
| Water Consumption | 50 L |
| Color | White |
| Dimensions | 85 x 60 x 60 cm |
| Loading type | Front |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
