To Next PageTo Next PageWhat to do if my Daewoo DWD-F1042 shows UE UNBALANCE ERROR?
To resolve the UE UNBALANCE ERROR on your Daewoo Washer, rearrange the laundry inside the drum. This error typically occurs when the laundry is concentrated on one side during the spin cycle.
Why is my Daewoo Washer oversudsing?
If your Daewoo Washer is producing excessive suds, it may be due to using too much or an unsuitable detergent. Try using a suitable detergent and the correct amount for your load size.
Why is my Daewoo DWD-F1042 Washer making a thumping sound?
If your Daewoo Washer is making a thumping sound, it's likely due to a heavy wash load, which is usually normal. However, if the sound persists, the washer may be out of balance. Stop the washer and redistribute the wash load.
What to do for Daewoo Washer IE WATER INLET ERROR?
If you are experiencing the IE WATER INLET ERROR on your Daewoo Washer, make sure the water tap is fully open. Also, check the filter of the valve inlet for any clogs and clean it if necessary. If problems persist you should change the valve inlet, water level sensor or drain motor. Also check the PCB ASS’Y.
How to resolve LE DOOR OPEN ERROR on Daewoo Washer?
To resolve the LE DOOR OPEN ERROR on your Daewoo Washer, ensure the door is closed properly. This error can occur if the Start/Hold button is pressed while the door is open. If problems persist you should change the switch door lock or the PCB ASS’Y.
General| Type | Front Load |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 1400 RPM |
| Energy Rating | A+++ |
| Weight | 70 kg |
| Maximum spin speed | 1400 RPM |
| Washing capacity | 10 kg |
| Water Consumption | 50 L |
| Color | White |
| Dimensions | 85 x 60 x 60 cm |
| Loading type | Front |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
Information on transit bolts used to prevent damage during transport.
Instructions for safely removing transit bolts before operation.
Guidelines for selecting an appropriate and stable location for the washing machine.
Important safety information regarding the BS plug and wiring for UK users.
Step-by-step guide for connecting the water inlet hose.
Instructions for correctly installing the drain hose for proper water drainage.
Procedure for ensuring the washing machine is level to prevent noise and vibration.
Guide to cleaning the exterior and interior of the washing machine.
Procedure for cleaning the water inlet filter to ensure proper water flow.
Instructions for cleaning the drain pump filter to ensure smooth operation.
Guide to diagnosing and resolving common symptoms like noise, leaks, and operational failures.
