How to fix Daewoo DWD-FD1022 that won't spin?
If your Daewoo Washer isn't spinning, check if the clothes in the drum are collected on one side, ensure the washer is installed on an even floor and that vibration isn't excessive, and verify that the door is closed. The lamp “ ” will light up if the door is open.
What to do if water in my Daewoo DWD-FD1022 does not drain?
If the Daewoo washer is not draining water, begin by cleaning and straightening the drain hose to ensure it is free from kinks or clogs. If the problem persists, clean the drain filter.
Why door of my Daewoo DWD-FD1022 does not open?
Once the Daewoo washer has started, the door cannot be opened for safety reasons.
How to prevent oversudsing in my Daewoo Washer?
Too much detergent or using an unsuitable detergent can cause excessive foaming in your Daewoo washer, which may result in leaks.
Why is my Daewoo DWD-FD1022 making a vibrating noise?
If your Daewoo washer is making a vibrating noise, ensure all transit bolts and packing have been removed, referring to the Installation Guide if needed. Also, make sure all the feet are resting firmly on the ground. If the noise continues, the wash load may be unevenly distributed; stop the washer and rearrange the load.
What does E5 error mean on Daewoo DWD-FD1022 Washer?
If your Daewoo washer is displaying the E5 error, the laundry is jammed between the gasket and the drum. Rearrange the laundry.
How to resolve E9 error on Daewoo DWD-FD1022?
If your Daewoo washer is displaying the E9 error, the water level sensor is an inferior product. You should change the water level sensor.
What to do if my Daewoo DWD-FD1022 displays H2 error?
If your Daewoo washer is displaying the H2 error, the thermistor wash is an inferior product or has broken down. Change the thermistor wash.
How to resolve UE UNBALANCE ERROR on Daewoo Washer?
A UE UNBALANCE ERROR on your Daewoo Washer indicates that the laundry is concentrated on one side of the drum during the spin cycle. To fix this, rearrange the laundry inside the drum.
How to fix OE error on Daewoo DWD-FD1022 Washer?
If you see the OE error on your Daewoo washer, it means the drain hose is kinked or clogged. You should clean and straighten the drain hose.
General| Washing Capacity | 10 kg |
|---|---|
| Drying Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | A |
| Color | White |
| Type | Washer Dryer |
To Next Page