To Next PageTo Next PageHow to fix a Daewoo DWD-FD1411 Washer that does not drain?
If the water in your Daewoo Washer isn't draining or is draining slowly, the drain hose may be kinked or clogged. Clean and straighten the drain hose to resolve this. Alternatively, the drain filter may be clogged, so clean the drain filter as well.
What to do if the door of my Daewoo Washer does not open?
Once a wash cycle has started on your Daewoo Washer, the door cannot be opened for safety reasons. Wait two minutes after the cycle has ended to allow the electric locking mechanism time to release before attempting to open the door.
Why Daewoo Washer won't start?
If your Daewoo Washer isn't starting, check the following: Is there a power failure? Is the power cord correctly connected to an electric outlet? Did you turn on the power? Did you press the Start/Hold button? Is there the correct amount of laundry in the washer?
What to do if Daewoo Washer won't drain?
If your Daewoo Washer isn't draining, check if the drain hose is frozen or blocked by dirt, kinked, or deformed. Also, make sure the end of the drain hose isn't immersed in water and check for excessive dirt inside the drain filter.
Why is my Daewoo DWD-FD1411 Washer leaking water?
If your Daewoo washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer. If the issue persists, your house drain pipes may be clogged, try to unclog them or contact a plumber.
How to fix IE error on Daewoo Washer?
If your Daewoo washer is displaying the 'IE' error, it could be due to a closed water tap. Open the water tap. Alternatively, the filter of the valve inlet may be clogged, clean the filter of the valve inlet.
How to fix OE error on Daewoo DWD-FD1411 Washer?
If you see the OE error on your Daewoo washer, it means the drain hose is kinked or clogged. You should clean and straighten the drain hose.
How to resolve UE error on Daewoo Washer?
If your Daewoo washer is displaying the UE error, it means the laundry is concentrated to one side of the drum during spin. To fix this, rearrange the laundry.
How to fix PFE error on Daewoo DWD-FD1411 Washer?
If your Daewoo washer displays the PFE error and stops during spinning due to too much or unsuitable detergent: 1. Turn off the power of the washing machine. 2. Press the Power button. 3. Press the SPIN button.
How to solve LE error on Daewoo DWD-FD1411 Washer?
If your Daewoo washer is displaying the LE error, it means the Start/Hold button is pressed while the door is opened. Close the door.
General| Drying Capacity | 6 kg |
|---|---|
| Energy Efficiency Class/Energy Rating | A |
| Spin Speed | 1400 rpm |
| Weight | 70 kg |
| Type | Washer Dryer |
| Programs | Cotton, Rinse, Spin |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
