M
Mr. Robert SuarezSep 5, 2025
Why is my Daewoo Washer cycle time delayed?
- MMelissa BrownSep 5, 2025
The washing time may vary by the amount of laundry, water temperature, and other conditions.
To Next PageTo Next PageWhy is my Daewoo Washer cycle time delayed?
The washing time may vary by the amount of laundry, water temperature, and other conditions.
Why does my Daewoo DWD-FT1081 make a thumping sound?
A thumping sound in your Daewoo Washer is usually normal when you have heavy wash loads. If the sound continues, the washer is probably out of balance. Stop the washer and redistribute the wash load.
How to address UE UNBALAN ERROR on Daewoo DWD-FT1081?
To address the UE UNBALAN ERROR on your Daewoo Washer, rearrange the laundry if it is concentrated to one side of the drum during spin.
What causes a rattling noise in my Daewoo DWD-FT1081?
A rattling and clanking noise in your Daewoo Washer could be due to foreign objects such as coins or safety pins in the drum or pump. Stop the washer and check the drum and filter.
How to resolve LE DOOR OP ERROR on Daewoo Washer?
To resolve the LE DOOR OP ERROR on your Daewoo Washer: * Close the door if the Start/Hold button is pressed while the door is opened. * Change the switch door lock if it is an inferior product. * Change the PCB ASS’Y if it does not check the door lock.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1000 rpm |
| Programs | 15 |
| Weight | 65 kg |
| Water Consumption | 55 liters |
Instructions for removing transit bolts to prevent transport damage and ensure proper operation.
Guidelines for selecting a suitable installation location, including floor level and clearance.
Step-by-step guide for connecting the water inlet hose to the machine, with options for different tap types.
Proper methods for installing the drain hose to prevent water leakage and ensure correct drainage.
Procedures for adjusting the machine's feet to ensure it is level, reducing vibration and noise.
Guidance on cleaning the exterior and interior of the washing machine to maintain performance and hygiene.
Identifies common symptoms like noise, leaks, and water flow problems with their causes and solutions.
Addresses issues such as failure to start, spin, door opening, cycle delays, and insufficient spinning.
Explains various error codes (IE, OE, UE, LE, E2, E4, E8, E9, H2, H4, H5, H6, H8, PFE) with their causes and solutions.
