To Next PageTo Next PageHow to troubleshoot E6 EMG ERROR on Daewoo Washer?
To resolve the E6 EMG ERROR on your Daewoo Washer, rearrange the laundry to ensure it is not jammed between the gasket and the drum. If problems persist you should change the motor or the PCB ASS’Y.
What to do if the Daewoo DWD-F1231 door does not open?
If your Daewoo Washer door won't open, wait two minutes to allow the electric locking mechanism to release after the cycle has stopped. The door is designed to remain locked for safety reasons once a cycle has started.
What to do if my Daewoo DWD-F1231 won't start?
If your Daewoo washer isn't starting, ensure the power cord is securely plugged into the wall outlet. Check your house fuse or circuit breaker, and reset it if necessary. Also, verify that the water supply tap is turned on.
What causes E6 EMG ERROR on Daewoo DWD-F1231?
The E6 EMG ERROR on your Daewoo washer can be caused by laundry being jammed between the gasket and the drum; rearrange the laundry. Alternatively, the motor or the PCB ASS’Y might be faulty and require replacement.
Why is my Daewoo Washer making a rattling noise?
If your Daewoo Washer is making a rattling or clanking noise, there might be foreign objects like coins or safety pins in the drum or pump. Stop the washer and check the drum for any such items.
How to troubleshoot IE WATER INLET ERROR on Daewoo Washer?
To address the IE WATER INLET ERROR on your Daewoo washer, first, ensure that the water tap is open. If it is, check the filter of the valve inlet for any clogs and clean it. If the issue persists, consider that the valve inlet or the water level sensor might be faulty and need replacement. Also, check if the drain motor is working during water supply, which would indicate a need to change the drain motor. Lastly, the PCB ASS’Y might not be checking the water level correctly, requiring a replacement.
Why is my Daewoo Washer not spinning?
If your Daewoo Washer won't spin, check if the clothes in the drum are collected on one side. See if the washer is installed on an uneven floor or experiencing serious vibration. Also, make sure the door is closed properly; the lamp will light up if the door is open.
Why is my Daewoo Washer making a vibrating noise?
If your Daewoo Washer is making a vibrating noise, ensure all transit bolts and packing have been removed according to the installation guide. If the noise continues, it could be due to an uneven wash load. Stop the washer and rearrange the load to balance it.
How to resolve H8 HEATER WASH OVERHEATING ERROR on Daewoo Washer?
To resolve the H8 HEATER WASH OVERHEATING ERROR on your Daewoo washer, it indicates that the heater worked without water in the tub. Check the water level and the heater wash.
How to fix Daewoo DWD-F1231 Washer that will not spin?
If your Daewoo Washer is not spinning, make sure that the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing the button for the washer to begin spinning, as the door must lock first.
General| Loading Type | Front Load |
|---|---|
| Maximum Spin Speed | 1200 RPM |
| Product Type | Washing Machine |
| Spin Speed | 1200 RPM |
| Number of Programs | 15 |
| Noise Level (Wash) | 58 dB |
| Noise Level (Spin) | 78 dB |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Weight | 65 kg |
| Color | White |
| Display Type | LED |
| Child Lock | Yes |
| Delay Start | Yes |
