To Next PageTo Next PageWhy is the wash cycle time delayed on my Daewoo DWD-HT1011?
The washing time on your Daewoo Washer may vary based on the amount of laundry, water pressure, water temperature, and other usage conditions. The wash time increases if an imbalance is detected.
Why does my Daewoo DWD-HT1011 Washer not start?
If your Daewoo Washer isn't starting, ensure the power cord is securely plugged into the wall outlet. Check your house fuse or circuit breaker, and reset it if necessary. Also, make sure the water supply tap is turned on.
Why is my Daewoo DWD-HT1011 Washer making a thumping sound?
Heavy wash loads may produce a thumping sound in your Daewoo Washer, which is usually normal. If the sound continues, it's probably out of balance; redistribute the wash load.
What causes oversudsing in my Daewoo DWD-HT1011?
Too much or unsuitable detergent may cause foaming in your Daewoo Washer, potentially leading to water leaks.
Why won't my Daewoo DWD-HT1011 Washer spin?
If your Daewoo Washer won't spin, make sure the door is firmly shut. Close the door and press the Start/Pause button; it may take a moment to begin spinning, as the door must lock first.
How to reduce vibrating noise from my Daewoo DWD-HT1011?
If your Daewoo Washer is making vibrating noises, ensure all transit bolts and packing have been removed following the installation guide. Also, check that all the feet are resting firmly on the ground and rearrange the wash load if it's unevenly distributed in the drum.
Why is water not entering my Daewoo DWD-HT1011 Washer properly?
If water isn't entering your Daewoo Washer or is entering slowly, first check if the water supply in your area is adequate by checking another tap. Ensure the water supply tap is fully open and that the water inlet hose isn't kinked. Also, inspect the filter of the water inlet for any clogs.
What does the LE error mean on my Daewoo DWD-HT1011 Washer?
If your Daewoo Washer displays an LE DOOR OPEN ERROR, it could be because the Start/Pause button is pressed while the door is opened (close the door), the switch door lock is an inferior product (change the switch door lock), or the PCB ASS’Y does not check the door lock (change the PCB ASS’Y).
How to fix a rattling noise in my Daewoo DWD-HT1011?
If your Daewoo Washer is making rattling or clanking noises, stop the washer and check the drum and filter for any foreign objects like coins or safety pins.
What to do if my Daewoo DWD-HT1011 is leaking water?
If you notice water leaking from your Daewoo Washer, check if the inlet or drain hoses are loose at the tap or washer and tighten the hose connections. Also, inspect your house drain pipes for clogs and unclog them. If the problem persists, contact a plumber.
General| Type | Washer Dryer |
|---|---|
| Washing Capacity | 10 kg |
| Drying Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Energy Rating | A |
| Noise Level (Wash/Spin) | 56/76 dB |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
| Programs | Cotton, Delicate, Wool, Quick Wash |
Step-by-step guide to remove transit bolts for safe operation.
Guidelines for selecting and preparing the washing machine's installation location.
Important safety information for UK users regarding the mains plug and earthing.
Instructions for correctly connecting the water inlet hose to the washing machine.
Proper installation procedures for the drain hose to prevent water leakage and noise issues.
How to adjust the machine's legs for optimal stability and reduced vibration.
Guide on cleaning the exterior and interior of the washing machine for longevity.
Measures to protect the washer from freezing damage during storage or cold periods.
Steps to clean the water inlet filter to ensure efficient water supply.
How to clean the drain pump filter to maintain optimal drainage performance.
Instructions for cleaning the detergent case and fabric softener compartment.
Methods to clean the washing drum, addressing scale and rust build-up.
Procedure for removing the door lock switch assembly for repair or replacement.
Steps to access and remove the heater and thermistor components.
Detailed guide on how to safely remove the universal motor unit.
Instructions for removing the drain pump for maintenance or replacement.
Exploded diagram and part numbers for the box inlet assembly.
Exploded diagram and part numbers for the front panel components.
Exploded diagram and part numbers for the front cabinet assembly.
Exploded diagram and part numbers for the tub assembly.
Exploded diagram and part numbers for the main cabinet components.
Exploded diagram and part numbers for the top plate assembly.
Explanation of the power ON/OFF and cycle start/pause functionalities.
How to adjust water temperature and select spin speed for wash cycles.
Overview of special options like Rinse Hold, Pre-Wash, and Crease Care.
Details on using ADD+, Time Delay, and Child Lock features.
Guide to selecting wash programs using the main program dial.
A chart detailing the sequence and duration of operations for different wash programs.
Instructions for accessing and utilizing the machine's operational test modes.
Method to check the water level frequency, indicating sensor status.
How to perform a continuous spinning test to check motor and spin performance.
Guide to running repetitive cycles for durability testing.
