To Next PageTo Next PageWhat to do if the door on my Daewoo DWD-HT1011 won't open?
If the door of your Daewoo Washer won't open, wait two minutes after the cycle has finished to allow the electric locking mechanism time to release.
What to do if my Daewoo DWD-HT1011 Washer won't drain?
If water in your Daewoo Washer isn't draining or is draining slowly, inspect the drain hose for kinks or clogs and clean and straighten it. Also, check the drain filter for any blockages and clean it.
General| Type | Washer Dryer |
|---|---|
| Washing Capacity | 10 kg |
| Drying Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Energy Rating | A |
| Noise Level (Wash/Spin) | 56/76 dB |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
| Programs | Cotton, Delicate, Wool, Quick Wash |
Step-by-step guide to remove transit bolts for safe operation.
Guidelines for selecting and preparing the washing machine's installation location.
Important safety information for UK users regarding the mains plug and earthing.
Instructions for correctly connecting the water inlet hose to the washing machine.
Proper installation procedures for the drain hose to prevent water leakage and noise issues.
How to adjust the machine's legs for optimal stability and reduced vibration.
Guide on cleaning the exterior and interior of the washing machine for longevity.
Measures to protect the washer from freezing damage during storage or cold periods.
Steps to clean the water inlet filter to ensure efficient water supply.
How to clean the drain pump filter to maintain optimal drainage performance.
Instructions for cleaning the detergent case and fabric softener compartment.
Methods to clean the washing drum, addressing scale and rust build-up.
Procedure for removing the door lock switch assembly for repair or replacement.
Steps to access and remove the heater and thermistor components.
Detailed guide on how to safely remove the universal motor unit.
Instructions for removing the drain pump for maintenance or replacement.
Exploded diagram and part numbers for the box inlet assembly.
Exploded diagram and part numbers for the front panel components.
Exploded diagram and part numbers for the front cabinet assembly.
Exploded diagram and part numbers for the tub assembly.
Exploded diagram and part numbers for the main cabinet components.
Exploded diagram and part numbers for the top plate assembly.
Explanation of the power ON/OFF and cycle start/pause functionalities.
How to adjust water temperature and select spin speed for wash cycles.
Overview of special options like Rinse Hold, Pre-Wash, and Crease Care.
Details on using ADD+, Time Delay, and Child Lock features.
Guide to selecting wash programs using the main program dial.
A chart detailing the sequence and duration of operations for different wash programs.
Instructions for accessing and utilizing the machine's operational test modes.
Method to check the water level frequency, indicating sensor status.
How to perform a continuous spinning test to check motor and spin performance.
Guide to running repetitive cycles for durability testing.
