Daewoo DWF-1095 E Series - Page 27

51 52
•COURSE BUTTON
•RES. BUTTON
TIME TO PUSH
DISPLAY FUNCTION
THE SOAK BUTTON
•It is the function to select strength of water
wave in fuzzy course.
•SETTING METHOD
Save if by START/HOLD BUTTON after set
the SOAK BUTTON
: strong : medium
: soft
1st Time
2nd Time
TIME TO PUSH
DISPLAY FUNCTION
THE SOAK BUTTON
•It is the function to give up temperature
sensing in fuzzy course.
•SETTING METHOD
Save it START/HOLD BUTTON after set the
SOAK BUTTON
: action : stop
1st Time
•CANCEL BUTTON
•WATER LEVEL BUTTON
TIME TO PUSH
DISPLAY FUNCTIONTHE WATER
LEVEL BUTTON
•It’s LOAD SENSING change function
according to water level in fuzzy course.
•It is able to set LOAD SENSING DATA in all
local AC VOLTAGE and FREQUENCY
•SETTING METHOD
Set the WASH BUTTON(data up), SOAK
BUTTON (data down) to each level, save it
by START/HOLD BUTTON.
1st Time
2nd Time
TIME TO PUSH
DISPLAY FUNCTION
THE WASH BUTTON
•It is the function to set water level data (by
LOAD SENSING of fuzzy course) higher, or
lower
•It is the function to adjust the error of LOAD
SENSING
•SETTING METHOD
Save it by start/hold button after set the
WASH BUTTON
1st Time
2nd Time