22
THE REPAIR
The Disassemble Method Of “Panel R”
1 To disassemble the 2 pieces of screw in the rear
of Washing Machine by using Driver.
2 To put the Driver into the inside of ‘PANEL R’
from back side, and then push the Driver upward
strongly.
3 The picture of disassembling state. 4 ALTERNATIVE METHOD TO DISASSEMBLE
‘PANEL R’. Hold the ‘PANEL R’ with putting the
Driver into the gap between ‘PANEL R’ and
“DOOR B’, and then push the Driver upward.
To Next Page
Loading...
