19
THE REPAIR
ecitoNssecorP.oN
Assemble 1
1
2
3
4
Assemble the coupling.
Assemble the new clutch boss
ass’y.
Assemble the pulley.
Assemble the spring washer.
Check the uneven face of cou-
pling is assembled upward.
- Push in the clutch boss ass’y
with rotating on the clockwise
direction.
-
After assembling, rotate on the
clockwise more 2~3 teeth and
pull out the pulley shaft upward.
If there was plain washer, you
have to assemble plain washer
the first and then assemble
spring washer.
The Process Of Assemble
To Next Page
Loading...
