51
REPLACEMENT OF MAIN COMPONENTS
7-5. REPLACING CABINET FRAME HEATER (and/or) MULLION HEATER
A. Insert the and edge of ‘–’type screw
driver into the gap between the frame
and the frame cover.
B. Take apart the frame cover from the
frame.
C. Separate the frame cover by sliding the
screw driver.
D. Do just like above instructions in other
parts (bottom side, right side and top
side).
FD,SD-650R,1250R¿ 12– ` (¿) 02.8.21 4:49 PM ˘`51
To Next Page
Loading...
