3 Optional
Function
Temperature 1. Option for Weak Refrigeration
1) SW1 On : Standrd On/Off applied
2) SW1 Off : 1.5
lower than Standard On/Off
2. Option for Middle Off Point of Fresh Food Compartment
1) J01 (O), R01 (O), R02 (O) : 3
2) J01 (X), R01 (O), R02 (O) : 3.5
3) J01 (X), R01 (O), R02 (X) : 4.5
3. Option for On/Off Difference of Fresh Food Compartment
1) J02 (O), J03 (O), R04 (O) : 0.5
2) J02 (X), J03 (O), R04 (O) : 3.5
3) J02 (X), J03 (O), R04 (X) : 4.5
4. Option for Fan Delay
1) JP03 (O) : Fan On/Off after 1 minute of Comp On/Off
2) JP03 (X) : Comp and Fan On/Off are linked(co-working).
4Defrosting
Period
Defrosting
Mode
1. Determination of Defrosting Period
1) Total Run-time of Comp : 6, 8, 10 hours
2) Run-ratio of Comp : over 80%
3) Any Error : R1, D1, D2, C1
4) Total Time : 60 hours
2. Explanation
1) Defrosting starts if any Error happes or the run-ratio of Comp is over 80%,
when the total run-time of Comp is over 6 hours.
2) Defrosting starts if the run-ratio of Comp is over 80 %,
when the total run-time of Comp is over 8 hours.
3) Defrosting starts unconditionally if the total run-time of Comp is 10 hours,
in case that any condition of 1) and 2) is not satisfied.
4) Defrosting starts immediately if total time(Comp On Time+Comp Off Time)
is over 60 hours,
in case that any condition of 1), 2) and 3) is not satisfied.
NO
CONTROL
FUNCTION
CONTROL
OBJECTS
CONTENTS REMARK
OPERATION AND FUNCTIONS