Daewoo G32E-3 - User Manual

Operation &
Maintenance Manual
LIFT TRUCKS
D20S-3, D25S-3, D30S-3, D33S-3
G20E-3, G25E-3, G30E-3
GC20E-3, GC25E-3, GC30E-3
G20P-3, G25P-3, G30P-3, G33P-3
GC20P-3, GC25P-3, GC30P-3
D32S-3 (6,500lb@24"L.C.)
G32E-3 (6,500lb@24"L.C.)
G32P-3 (6,500lb@24"L.C.)
GC32E-3 (6,500lb@24"L.C.)
GC32P-3 (6,500lb@24"L.C.)
SB2302E06

Summary

Safety Section

Important Safety Information

Key safety rules, hazard identification, and training requirements for safe operation.

Operator Warnings and Precautions

General operational warnings, specific hazard alerts, and parking brake safety.

General Hazards and Tipover Survival

Common hazards, safe practices, and procedures for tipover survival.

General Section

Technical Specifications

Detailed technical specifications for various lift truck models.

Load Capacity Charts

Load capacity charts for different models and configurations.

Noise and Vibration Levels

Data on noise and vibration levels for different truck models.

Operation Section

Operator Station and Controls

Overview of instrument panel, indicators, gauges, and key operational controls.

Engine and Fuel System Operation

Operation of engine systems, fuel selection, and compartment access.

Driving and Lifting Procedures

Step-by-step guidance for driving, lifting loads, and maneuvering the lift truck.

Troubleshooting and Diagnostics

Procedures for diagnosing and resolving system faults and operational issues.

Maintenance Section

Maintenance Intervals and Schedules

Outlines recommended maintenance intervals based on service hours and time.

Routine Inspections and Checks

Covers daily and periodic inspections for key truck components and systems.

Fluid Services and Lubrication

Guidelines for engine oil, hydraulic oil, cooling system, and lubrication.

Component-Specific Maintenance

Detailed procedures for maintaining specific components like forks, tires, and brakes.

Daewoo G32E-3 Specifications