3.0 - PRE-OPERATING PROCEDURE
Inspect all components for damage and to ensure that none are missing. If
you require a replacement, do not operate this tool until all parts are present
and in proper working order.
Do not modify or create accessories for this equipment. Using modified
components may result in damage and may void the warranty. Contact
customer service if you suspect that this equipment has been tampered with.
3.1 - Engine Oil Check
1. Ensure the Trash Pump is on a level surface.
2. Inspect engine oil:
• Take out the dipstick and clean it with a dry towel.
•
English
4
To Next Page
Loading...
