Cleaning the Dirty Water Tank Filter (18)
1. Remove the Dirty Water Tank Lid (10)
and twist off the filter cap anticlockwise
and remove the Dirty Water Tank Filter
(18) as shown left:
2. Rinse the Dirty Water Tank Filter (18) in
warm running water until clean.
3. Allow the filter to dry for 24 hours before
refitting it to the tank.
Cleaning the Clean Water Filter (17)
1. Whilst the Dirty Water Tank (8) is
removed, lift out the Clean Water Filter
(17) at the bottom of the compartment
arrowed left.
2. Rinse the Clean Water Filter (17) in
warm running water until clean.
3. Allow the filter to dry for 24 hours before
refitting it to the compartment.
Cleaning the Multi Tool (1)
1. Press the button (arrowed right)
on the back of the Multi Tool (1)
and detach the brush head from
the handle.
2. Lift the clip (in the direction of the
arrow shown right) on the brush
head and remove the brush from
the cover.
3. Thoroughly rinse all the Multi Tool
(1) parts with water. Carefully
remove any dirt/blockages.
To Next Page
Loading...
