Before First use of Your 1.4L Spot Washer
• Remove all packing materials and discard responsibly.
• Take care whilst opening the carton as a sharp blade may damage the product.
• Ensure that all parts are present – see ‘Description of Parts & Accessories’
above:
Assembling Your Spot Washer
About Your Spot Washer
• This Spot Washer is designed to clean small areas of household fabric surfaces,
such as patches of carpets and upholstery, it is not suitable for use as a
conventional vacuum cleaner.
• Do not use the Spot Washer on other materials.
• Do not add cleaning solutions to the water tank. Only use the spot cleaner with
tap water (or purified/distilled water).
• Ensure the water does not enter electrical parts.
Filling the Clean Water Tank (13)
1. Grasp the lid and lift the Clean Water Tank (13) straight up out of Spot Washer.
2. Turn the tank upside down and
unscrew the filling cap (circled
right) from the bottom of the tank.
Left: Attach the Flexible Hose (7)
to the Spot Washer by using the
Hose Release Catch (16) as
follows: Pull back the lock and
press the ‘square’ so that the
catch opens.
Push the Flexible Hose (7) onto
the outlet on the unit and let go
of the square. Lock the hose in
place by pushing the lock
forwards.
Repeat the above process to
attach the Multi Tool (1) to the
other end of the Flexible Hose (7).
To Next Page
Loading...
