CONTROLS
When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the display shows “:0” when
the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the TIME SET pads in sequence.
4. Touch the CLOCK pad.
The display stops blinking, and the colon starts blinking. If you selected 12 hour
clock system, this digital clock allows you to set from 1:00 to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from
0:00 to 23:59
»S
etting the clock
If you attempt to enter an incorrect time, the time will not be set and it
will return to previous status. Touch the CLOCK pad and re-enter the
time.
NOTE
DESUK_KOR-9GPB7S42.indd 10 2014-05-27 오후 2:59:53
To Next Page
Loading...
