Daewoo RCC-250F - Cover Assembly

5-4. Cover Body Assembly
1) Take HANDLE(#4) out of COVER BODY by using an awl or "-" scerw driver and check them.
2) Unscrew 2 SCREWS (#3) then remove HANDLE ASSY(#2)
3) Take SWITCH(#5), HARNESS SW(#6) out of COVER BODY by using an awl or "-" scerw driver
4) Unscrew a SCREW (#8) then remove SLIDE VOL PCB and check it.
5) Unscrew a SCREW (#10) then remove LED PCB ASSY and check it.
RCC-250S
RCC-250B
RCC-250B
RCC-250F
RCC-250B
9
10
1
4
3
4
3
2
4-2
4-3
4-1
5
6
8
7