Operation – shredding paper
en
1.
Please follow the safety instructions.
1. Prior to using the document shredder, please check the position of the collection bin for CDs/DVDs
and bank cards/credit cards. When shredding paper, this bin must be at the front of the collection
bin for paper.
2. Close the door of the document shredder.
3. Connect the mains cable supplied to the document shredder and plug into a mains socket. Switch
on the main switch. After switching on at the main switch, wait 2–3 seconds.
4. Switch on the document shredder with the On/Off/Stop button.
1.1
1. Observe the maximum number of sheets of paper as stated in the technical data!
2. Insert the paper into the middle of the paper feed: the built-in photoelectric sensor starts the doc-
ument shredder automatically.
3. Once the paper feed is clear again, the document shredder switches off automatically and goes into
stand-by.
4. Continuous operation - If you hold down the Forward button (for approx. 5 sec.), the document
shredder changes to continuous operation.
5. If the supply of paper is interrupted for 15 seconds, continuous operation is interrupted.
To Next Page
Loading...
Need help?
General
