EasyManuals Logo

Dahua Technology ARA12-W2 User Manual

Dahua Technology ARA12-W2
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
User's Manual
7
6 Wireless Siren Configuration
You can view and edit general information of the siren.
6.1 Configuring the Siren
On the
Hub
interface, select the siren as needed from the accessory list, and then you can configure
the parameters of the siren.
Table 6-1 Siren parameter description
Parameter Description
Device Configuration
View device name, type, SN and device model.
Edit device name, and then tap
Save
to save configuration.
Area Select the area to which the siren is assigned.
Control Permissions Select the area over which the siren has control permissions.
Sound Settings
Configure volume level.
Select from low, medium, and high.
Alarm Duration
Configure the duration of the alarm sound.
Select from 3 s to 180 s.
Alarm Demand
If enabled, the siren flashes green every three seconds, indicating
that the detector is armed now.
Signal Strength Detection Check the current signal strength.
Speaker Test
Tap
Start Detection
to test the volume level of the alarm.
Transmit Power
Select from high, low, and automatic.
The higher the transmission power, the farther the transmission
and the higher power consuming.
Cloud Update Update online.
6.2 Viewing Status of the Siren
On the
Hub
interface, select the siren as needed from the accessory list, and then tab to view
the status of the siren.
Table 6-2 Status
Parameter Description
Temperature The temperature of the environment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua Technology ARA12-W2 and is the answer not in the manual?

Dahua Technology ARA12-W2 Specifications

General IconGeneral
BrandDahua Technology
ModelARA12-W2
CategorySecurity System
LanguageEnglish